- Blue Cable fuse holder in IDC technic for single wires 0,8 to 2 mm²
- Exceptionally quick to assemble, because the lines must not be bared, just inserted and the cap is closed with pliers.
|
|
- Fuse holder low voltage each with screw terminal block for in and output
- for cables up to max. 4 mm²
- for max. 36V/30A
- Type 2-display and 3-display
|
|
- Safety Switch with squeeze clamp
- Crimp Pliers are necessary
- Mountable in any amount of units
|
|
- for applications with up to 36V
- available in 3 / 5 / 10 / 15 / 25A
|
|
- black masking tape made of soft PVC
- width: 50 mm, length: 10 m
- recommended e.g. to cover optical fibers where no light should be emitted
|
|
- Use as pre-cleaner for all areas where adhesive will be applied
- Spray Cleaner S gets rid of grease and cleans all Metals, Glass, Ceramics and almost all Plastics
- Quickly applied and residue-free
- by sensitive Thermoplast surfaces, please test compatibility
|
|
- Long lasting protection of metal parts and contacts in outdoor use through an extra thick film. Seals surfaces, resists humidity and the permeation of water. Especially resistant to the effects of salt water and atmospheric damage.
|
|
- Very powerful, one-component assembly glue. Recommended for almost all
tasks, for ex., with Tubelites, U-Canals, Fiber Optics and LED Lights.
Can also be used to seal. Withstands UV rays, protects against mold and
bacteria, drys cleanly and remains flexible. Can be used on wet or dry
surfaces.
|
|
|
|
Support / Tools 
