|
Light generator with 3 modern Luxeon® high-power LEDs in the base colors red, green and blue to create any desired mixed color in combination with a control device e.g. RGB-Flex Controller . If the output cable is not used for another LED-Beam RGB, it should be sealed with an Endplug „4-pole bridge“.
Up to 4 Deco-Fiber 1mm bundles can be operated at the same time. |
|
Read more...
|
|
|
Light generator with 3 modern Luxeon® high-power LEDs in the base colors red, green and blue to create any desired mixed color in combination with a control device e.g. an RGB-Flex Controller. If the output cable is not used for another LED-Beam RGB, it should be sealed with an Endplug „4-pole bridge“. Mounting and sealing of the optical fibers is realized by compression fitting, therefore it is necessary to specify if they should be used for 8 mm or 12 mm. |
|
Read more...
|
|
|
Light generator with modern Luxeon® high-power LED, control electronics and optics for an optimal feed-in of light into the Deco-Fiber bundles or special Sidelight fibers (see LED-Stream). |
|
Read more...
|
|
|
Light generator with modern Luxeon® high-power LED, control electronics and optics for an optimal feed-in of light into the Deco-Fiber bundles or special Sidelight fibers (see LED-Stream). |
|
Read more...
|
|
|
Triple light generator with modern Luxeon® high-power LEDs and control electronics for the feed-in of light into three Deco-Fiber bundles or special Sidelight fibers. Mounting in a right angle to the fiber, therefore only a very low installation depth of approx. 10 mm is necessary. |
|
Read more...
|
|
|
|
Light Generators 
